STEP-BY-STEP: Intretinere - Inlay Design - Aquarium

Asa aratau unghiile inainte de intretinere.

These is how the nails look like before the periodic maintanance.

Modelul pe care urmeaza sa il prezint este unul vechi, inainte sa fac cursul de perfectionare - Design cu Acryl Color 3D, asa ca florile de acryl nu sunt cele mai reusite.

The following design I will present it is kind of old, before I took my course of Design with Acrylic Powder 3D, so the acryl flowers are not the best ones.

 Pasul 1: Dezinfectam mainile si incepem sa pilim. Mare atentie sa nu atingeti cu freza unghia naturala - piliti-o doar cu pila de granulatie 180.

Pasul 2 : Aplicam primer.

Step 1: Desinfect the hands and start filing. Be carefur not to touch the natural nail with your polizor - file just with the normal file with granulation of 180.

Step 2 : Apply primer.

Pasul 3 : Aplicam gelul de baza - il uscam in lampa UV.

Pasul 4 : Aplicam cover gel - il uscam in lampa UV.

Step 3 : Apply base gel - cure in UV lamp.

Step 4 : Apply cover gel - cure in UV lamp.

Pasul 5 : Matuiti gelul cu un buffer / pila 180 sau 240.

Step 5 : File the gel with a buffer of a file 180 or 240.

Pasul 6 : Cu ajutorul unui buretel aplicam vopseaua acrilica prin tamponare.

Asteptam sa se usuce foarte bine.

Step 6 : Apply the acrilic paint with a sponge . Take a moment for the paint to dry.

Pasul 7 : Realizam florile 3D din acryl (monomer si polimer). Acestea trebuie sa fie subtiri si foarte joase. Realizam accente in mijlocul florilor cu vopsea acrilica, dupa care aplicam perlute si cristale.

Step 7 : We make the 3D acrilic flowers (from monomer and polimer). Those must be thin and very low.

In the middle of petals realize accents with acrilic paint. Apply pearls and cristals.

Pasul 8 : Aplicam gelul de constructie si il uscam in lampa UV.

  Step 8 : Apply construction gel - cure in UV lamp.

Pasul 9 : Matuiti gelul cu un buffer / pila 180 sau 240.

Step 9 : File the gel with a buffer of a file 180 or 240.

Pasul 10 : Pictam cu vopsea acrilica frunzulitele (cu pensula subtire nr.2) si aplicam punctele cu dots tool.Asteptam sa se usuce vopseaua.

Step 10 : Paint with acrilic colors the leaves (using a small brush no.2 ) and apply the dots with dots tool. Take a moment for the paint to dry.

Pasul 11 : Aplicam finish gel si uscam in lampa UV. Aplicati ulei de cuticule si masati usor.

 Step 11: Apply finish gel and cure in UV lamp. Apply cuticle oil and masage gently.

 Rezultatul:

 Final result: